Electric Solenoid Valve - 3/4" 24V AC Stainless Steel Body Normally Closed with VITON SEAL
Normally closed (N/C) electric solenoid valve featuring a high-quality stainless steel body, two-way inlet and outlet ports with three-quarter inch (3/4") female threaded (NPT) connections, and a heat and oil resistant Viton gasket. This valve is suitable for various applications with hot or cold water, gas, air, low viscosity fluids, oils, and hydrocarbons such as gasoline, kerosene, or diesel fuel.
The solenoid valves are rated IP65, making them resistant to water spray. For permanent outdoor installations, it is advisable to enclose the valves in protective housing as they are not intended for underwater use. Customers commonly select this versatile valve for DIY projects, moderate temperature applications, handling harsh chemicals, flow control in irrigation systems, reverse osmosis systems, or regulating propane gas flow.
Specifications:
- Pipe Size: 3/4"
- Flow Aperture: 20 mm
- Body Material: Stainless Steel
- Gasket / Diaphragm / Seal: VITON
- Operation Type: Semi-direct Lift Valve
- Operation Mode: Normally Closed
- Voltage: AC 24V ± 10%
- Power rating: 20 VA
- Suitable Media: Air, water, oil, Diesel fuel, kerosene, etc.
- Operational pressure range: Air/Water/Diesel fuel/kerosene: 0-7 Bar (0 to 101 PSI); Oil: 0-5 Bar (0 to 72 PSI)
- Flow capacity: 7.6 gallons per minute (GPM) of water at 60°F with a pressure drop of 1 PSI
- Flow value: 7.6 Cv
- Temperature, Minimum: 14°F (-10°C)
- Temperature Maximum: 248°F (120°C)
OVERHEATING WARNING: This solenoid valve is not designed for continuous operation (not a 100% duty cycle). During normal operation, the coil may get hot with a maximum temperature of around 176°F (80°C), meeting national standard JB/T7352-2010. Continuous energization for over 8 hours may lead to coil burnout.
