Electric Solenoid Valve- 1/2" 12V DC Stainless Steel Body Normally Closed, with VITON SEAL
An electric solenoid valve with a normally closed design, constructed with a high-quality stainless steel body. It features two-way inlet and outlet ports with half-inch female threaded connections. The valve is equipped with heat and oil resistant Viton seals, making it suitable for various applications, including hot or cold water, gas, air, low viscosity fluids, oils, and hydrocarbons like gasoline, kerosene, or diesel fuel.
The solenoid valves are rated IP65, meaning they can withstand water spray. For outdoor installations, it is recommended to enclose the valves for protection, as they are not designed for underwater use.
This general purpose valve is popular among customers for DIY projects, moderate temperature applications, handling harsh chemicals, flow control in irrigation systems, reverse osmosis systems, or home brewing.
Specifications:
- Pipe Size: 1/2"
- Flow Aperture: 16 mm
- Body Material: Stainless Steel
- Gasket / Diaphragm / Seal: VITON
- Operation Type: Semi-direct Lift Valve
- Operation Mode: Normally Closed
- Voltage: DC 12V ± 10%
- Power rating: 20 W
- Suitable Media: Air, water, oil, diesel fuel, kerosene, etc.
- Operational pressure range:
- Air/Water/Diesel fuel/Kerosene: 0-7 Bar (0 to 101 PSI)
- Oil: 0-5 Bar (0 to 72 PSI)
- Flow capacity: 4.8 gallons per minute (GPM) of water at 60°F with a pressure drop of 1 PSI
- Flow value: 4.8 Cv
- Temperature, Minimum: 14°F (-10°C)
- Temperature Maximum: 248°F (120°C)
- OVERHEATING WARNING: Not suitable for continuous operation. Under normal conditions, the solenoid valve will get hot. The coil's maximum temperature is about 176°F (80°C), compliant with national standards. Continuous energization for over 8 hours may cause the coil to burn.
