Electric Solenoid Valve - 3/4" 110V AC Brass Body Normally Open with VITON SEAL
Normally open (N/O) electric high pressure solenoid valve featuring a durable brass body, three-quarter inch (3/4") female threaded (NPT) connections, and heat and oil resistant Viton gasket. Suitable for hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons like gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, making them able to withstand spray from water. It is recommended to enclose the valves in protective housing if permanently installed outdoors. Not recommended for underwater use. Customers frequently choose this general purpose valve for do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to regulate propane gas flow.
Specifications:
- Model: USS2-00026
- Pipe Size: 3/4"
- Flow Aperture: 20 mm
- Body Material: Brass
- Gasket / Diaphragm / Seal: Viton
- Operation Type: Semi-direct Lift Valve
- Operation Mode: Normally Open
- Voltage: 110V AC ± 10%
- Power Rating: 22 VA
- Suitable Medium: Air, water, oil, Diesel fuel, kerosene, etc.
- Operational Pressure Range: 0 to 101 PSI (for Air, Water); 0 to 72 PSI (for Oil)
- Flow Capacity: 7.6 gallons per minute (GPM) of water at 60°F with a pressure drop of 1 PSI
- Flow Value: 7.6 Cv
- Temperature, Minimum: 14°F (-10°C)
- Temperature, Maximum: 248°F (120°C)
IMPORTANT:
OVERHEATING WARNING: Not designed for continuous operation (not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80℃). If energized continuously for more than 8 hours, the coil may burn.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.
