Electric Solenoid Valve- 1/4" 110V AC 230PSI Brass Body Normally Closed, VITON SEAL
Our high pressure solenoid valve is a durable and reliable option for various applications. Constructed with a brass body and heat and oil resistant Viton gasket, this valve is suitable for hot or cold water, gas, air, low viscosity fluids, oils, and hydrocarbons such as gasoline, kerosene, or diesel fuel.
The IP65 rating ensures that the valve can withstand water spray, making it ideal for different settings. It is recommended to enclose the valves in protective housing if installed outdoors, and they are not meant for underwater use.
Clients often choose this general purpose valve for DIY projects, moderate temperatures, harsh chemicals, flow control systems like irrigation or reverse osmosis, and regulating propane gas flow.
- Model: 2-00023
- Pipe Size: 1/4"
- Flow aperture: 12 mm
- Body Material: Brass
- Gasket / Diaphragm / Seal: Viton
- Operation Type: Pilot-Operated Valve
- Operation Mode: Normally Closed
- Voltage: 110V AC ± 10%
- Power rating: 10 VA
- Suitable medium: Air, water, oil, Diesel fuel, kerosene etc.
- Minimum medium pressure: 10 PSI (0.07 MPa)
- Maximum medium pressure: 232 PSI (1.6 MPa)
- Flow capacity: 1.5 gallons per minute (GPM) of water at 60°F with a pressure drop of 1 PSI
- Flow value: 1.5 Cv
- Temperature, Minimum: 14°F (-10°C)
- Temperature, Maximum: 248°F (120°C)
Overheating Warning: This solenoid valve is not designed for continuous operation. It may get hot during normal use, reaching a maximum temperature of about 176°F (80℃). Continuous energization for over 8 hours can cause the coil to burn.
Warning: This product may expose you to chemicals including lead, known to the State of California to cause cancer and birth defects. For more information, visit www.P65Warnings.ca.gov.
