Brass 1/2" Electric Solenoid Valve 24V DC Normally Closed VITON for Air Water Oil Fuel

General purpose electric solenoid valve with a durable brass body, 1/2" female threaded connections, and strong VITON gasket. Suitable for hot or cold water, natural gas, air, low viscosity fluids (< 20 cst) and petroleum based liquids. Ideal for supplemental gas tanks, sprinkler systems, and more.

Specifications:

• Size: 1/2"
• Flow Aperture: 16 mm
• Body Material: Brass
• Gasket / Diaphragm / Seal: VITON
• Rated Voltage: DC 24 V, ±10%
• Current: 0.833 A
• Power Rating: 20 W
• Operation Type: Semi-direct Lift Valve
• Operation Mode: Normally Closed
• Level of Protection: IP65
• Operational Pressure Range: 0 to 101 PSI / 0-0.7 MPa (for Air, Water); 0 to 72 PSI / 0-0.5 MPa (for Oil)
• Minimum Operational Temperature: 14 degrees Fahrenheit (-10 degrees Celsius)
• Maximum Operational Temperature: 248 degrees Fahrenheit (120 degrees Celsius)
• Flow Capacity: 4.8 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
• Flow Value: 4.8 Cv
• Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Not suitable for use with strong acid, strong base, waste water, industrial gas and other media containing impurities.
• Overheating Warning: While energized, the solenoid valve will get hot. The coil will reach a maximum temperature of about 80℃. Complies with national standard: JB/T7352-2010. Recommend energizing continuously for not more than 24h at a time.
• CA PROP65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. Not allowed for potable water use in the U.S.A. and its territories.